Rode NT4 Specs

Microphone
Primary ApplicationsLive Sound, Studio Recording, Recording to Mobile Device, Audio for Video, Location Sound, Field Recording
Form FactorStand/Boom Mount
Intended Sound SourcesInstrument, Orchestra, Room Ambiance
Sound FieldStereo
Stereo/Surround ConfigurationX/Y
Operating PrinciplePressure Gradient
Capsule2 x Condenser
Diaphragm0.5" / 12.7 mm
Polar PatternCardioid
OrientationEnd Address
CircuitrySolid-State
High-Pass FilterNone
Gain AdjustmentNone
Indicators1 x Red Single LED (Power)
WindscreenFoam (Included)
Performance
Frequency Range20 Hz to 20 kHz
Maximum SPL143 dB SPL (1 kHz, 1% THD)
Impedance200 Ohms
Sensitivity-38 dB at 1 kHz
Output Level13.9 dBu (Max, 1 kHz)
Dynamic Range> 128 dB
Signal-to-Noise Ratio78 dB A-Weighted
Equivalent Noise Level16 dB A-Weighted
Connectivity
Output Connectors (Analog)1 x XLR 5-Pin (on Mic)
2 x XLR 3-Pin Male (on Detachable Cable)
1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable)
Power
Operating Voltage48 V (Phantom Power)
9 V (Battery Power)
Operating Current Consumption4.5 mA (Phantom Power)
2.5 mA (Battery Power)
Battery Type1 x 9 V (Not Included)
Approximate Battery Life400 Hours
Physical
ColorNickel
MountingMic Clip/Stand Adapter (Included)
Mounting Thread Size5/8"-27 Female (3/8"-16 Female with Included Adapter)
Included CaseNone
Included FiltersNone
Dimensionsø: 1.3 x W: 2.4 x L: 9.1" / ø: 33 x W: 61 x L: 231 mm
Weight1.06 lb / 480 g
Packaging Info
Package Weight3 lb
Box Dimensions (LxWxH)15.65 x 12.15 x 4.7"