RODE NT1 Gen 5 Specs

Microphone
Primary ApplicationsLive Sound, Studio Recording
Form FactorLarge Diaphragm Mic / Stand/Boom Mount
Intended Sound SourcesVocals, Speech/Voice Over, Instrument
Sound FieldMono
Operating PrinciplePressure Gradient
Capsule1 x Condenser
Diaphragm1" / 25.40 mm
Polar PatternCardioid
OrientationSide Address
CircuitrySolid-State (JFET)
PadNone
High-Pass FilterNone
Tone AdjustmentNone
Gain AdjustmentNone
IndicatorsNone
On-Board ControlsNone
WindscreenNone
Performance
Frequency Range20 Hz to 20 kHz
Maximum SPL142 dB SPL
Impedance100 Ohms
Sensitivity-32 dBV/Pa at 1 kHz
Equivalent Noise Level4 dB A-Weighted
Connectivity
Output Connectors (Analog)1 x XLR 3-Pin Male (on Mic)
Output Connectors (Digital)1 x USB-C Female (on Mic)
Headphone ConnectorNone
Cable Length19.7' / 6 m
Wireless ConnectivityNone
BluetoothNone
Wi-FiNone
Digital Audio
A/D Conversion32-Bit
Sample RateUp to 192 kHz
Digital Signal ProcessingCompressor, EQ, Noise Reduction, Sound Presets
OS CompatibilityWindows 10
macOS 10.15 or Later
*As of February, 2023: Check with manufacturer for the most up-to-date compatibility
Mobile App CompatibleNo
*As of February, 2023: Check with manufacturer for the most up-to-date compatibility
Power
Bus PowerNone
Operating Voltage48 V (Phantom Power)
Physical
ColorBlack
MountingShockmount (Included)
Mounting Thread Size1/4"-20 Female
Included CaseNone
Included FiltersPop Filter
Construction MaterialAluminum
Dimensionsø: 2H: 7.4" / ø: 52H: 189 mm (Microphone)
Weight10.9 oz / 308 g (Microphone)
Packaging Info
Package Weight4.98 lb
Box Dimensions (LxWxH)11.5 x 8.1 x 6.7"