Transducer Type	Pre-Polarized Condenser
Frequency Response	40 Hz – 20 kHz
Polar Pattern	Hypercardioid
Output Impedance	250 ohms
Sensitivity	5.6 mV / Pa @ 1k
Equivalent Noise Level	24 dB
Signal to Noise Ratio	70 dB
Maximum SPL	=140 dB
Power Requirements	9 – 52 V phantom
Connector	3-pin mini to 3-pin XLRm (APS910)
Polarity	Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish	Machined Brass Capsule / Black Finish
Gooseneck	Flexible Steel
Weight	47 g / 1.6 oz
Length	30 mm / 1.14 in