Transducer Type	Pre-Polarized Condenser
Frequency Response	40 Hz – 20 kHz
Polar Pattern	Cardioid
Output Impedance	250 ohms
Sensitivity	Cardioid – 6 mV / Pa @ 1k Hypercardioid – 5.6 mV / Pa @1k
Equivalent Noise Level	<29>
Signal to Noise Ratio	>65 dB
Maximum SPL	=135 dB
Power Requirements	9-52 V phantom
Connector	Shielded 6’ terminating to a miniature 3 pin XLRf
Polarity	Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Materials / Finish	Machined Brass Capsule / Black Finish
Weight	48 g / 1.7 oz
Length	29 mm / 1.14 in