Transducer Type	Pre-Polarized Condenser
Frequency Response	40 Hz – 16.5 kHz
Polar Pattern	Supercardioid
Output Impedance	150 ohms
Sensitivity	5 mV / Pa @ 1k
Equivalent Noise Level	26 dB (A-weighted)
Signal to Noise Ratio	68 dB
Off-Axis Rejection	>20 dB
Maximum SPL	=140 dB (w/ -10 pad)
Power Requirements	9-52 V
Connector	3-pin XLRm
Polarity	Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
Materials / Finish	Zinc Alloy & Machined Brass / Black Finish
Weight	277 g / 8 oz
Length	181 mm / 7.1 in