Sennheiser XSW-D VOCAL SET Specs

System
Frequency Range2.400 to 2.483 GHz
Latency<4>
Transmission Range250' / 76.2 m (Line of Sight)
Simultaneous Operation of UnitsUp to 5 Systems Simultaneously
Frequency Response80 Hz to 18 kHz
Signal-to-Noise Ratio=106 dB
THD<0>
ModulationGFSK with TDMA
Operating Temperature-10 to 55° C / 14 to 131° F
Relative Humidity95% (Non-Condensing)
Transmitter
TypePlug-On Transmitter
Input ConnectorXLR-Female
Phantom PowerNo
RF Output Power10 mW
Microphone Max Input LevelMic-Level Input Only: 1.2 dBu (Typ. 0 dBu)
BatteryType: Built-In, USB-Rechargeable, Lithium-Ion
Battery Life: 5 Hours
Charging Time: 3 Hours (Typical)
Charging Cycles: Up to 1000 Cycles
Nominal Voltage: 3.7 V
Cell Capacity: 850 mAh
Input Voltage: 5.0 V (Typical)
Charging Temperature: 32 to 140° F / 0 to 60° C
Dimensions4.0 x 0.9 x 1.1" / 102 x 24 x 28 mm
WeightNot Specified by Manufacturer
Receiver
TypePlug-In
Output ConnectorXLR-Male
Audio Output LevelConsumer Line-Level Output Only: -12 dBu (Maximum)
BatteryType: Built-In, USB-Rechargeable, Lithium-Ion
Battery Life: 5 Hours
Charging Time: 3 Hours (Typical)
Charging Cycles: Up to 1000 Cycles
Nominal Voltage: 3.7 V
Cell Capacity: 850 mAh
Input Voltage: 5.0 V (Typical)
Charging Temperature: 32 to 140° F / 0 to 60° C
Dimensions4.3 x 0.9 x 1.1" / 109 x 24 x 28 mm
WeightNot Specified by Manufacturer
Microphone
TypeHandheld
Polar PatternCardioid
Transducer PrincipleDynamic
Frequency Response55 Hz to 16 kHz
ConnectorXLR-Male
ImpedanceNominal Impedance: 300 Ohms (At 1 kHz)
Terminating Impedance: 1 kOhm (Minimum)
Sensitivity1.8 mV/Pa (Free Field, No Load at 1 kHz)
Temperature Range32 to 104° F / 0 to 40° C
Dimensions (Ø x L)1.9 x 7.1" / 48 x 180 mm
Weight330 g (Without Cable)
Packaging Info
Package Weight600 g
Box Dimensions (LxWxH)9.5 x 9 x 2.7"