Take almost impossible photos by turning your camera into a high-speed capture device!
MIOPS Smart Trigger is a versatile camera trigger in a single unit and provides advanced triggering modes like Lightning, Sound, Laser, Timelapse, HDR and more.
MIOPS Smart+ Camera Trigger features a Bluetooth 4.0 Low Energy chip. The range depends on many factors, but in general you can expect a range of 20 to 30 meters. You will have a better range outdoors. The battery life of MIOPS Smart+ Camera Trigger depends on your usage, but in general the battery will last for about 3-4 days with continuous use. You can charge the battery from any USB power source. Don’t leave the battery drained for a long time. This may shorten the battery life.
MIOPS Smart+ Camera Trigger is compatible with the DSLR and mirrorless cameras of most major brands like Canon, Nikon, Sony, FujiFilm, etc. The camera must have a shutter release port to be triggered by MIOPS.
MIOPS Smart+ Camera Trigger is not waterproof, so it is a good idea to cover it if it is raining. You can use transparent plastic to cover the unit. The reception of the light sensor and microphone may reduce if covered. Test your setup afterward.
MIOPS Smart detects the lightning strike and trigger your camera at the exact moment.
Tips: First off all, the camera and lens must be on manual focus. You can set the focus to infinity. An exposure value of a few seconds should be enough for night-time lightning photography. You can set the aperture between f/4 and f/8. For day time lightning photography, you may choose a shorter exposure value. Please keep in mind that lightning stays visible for about half a second, so you can consider using an ND filter.
Sound mode allows you to capture high-speed events such as breaking glasses or popping balloons.
MIOPS Smart is the perfect gadget to take time-lapse pictures.
Laser mode is used to detect a laser beam and trigger your camera or flash when the beam is broken. Freeze a water droplet, a bullet or photograph a wild animal.
Flawless pictures with different exposures (between 1/30 and 30 secs) taken automatically even if your camera doesn’t have a bracketing feature to make an HDR image.
MIOPS Smart is smartphone controllable. You will have the comfort of using your smartphone to change the settings of your device within Bluetooth range.
Sony: Alpha: a1, a9 II, a9, a7S III, a7S II, a7S, a7R IVA, a7R IV, a7R IIIA, a7R III, a7R II, a7R, a7 III, a7 II, a7, a6600,
a6500, a6400, 6300, a6100, a6000, a5100, a5000, a3000, a99 II, a77 II, a68, a58
Cyber-shot: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, DSC-RX100 VA, RX100 V, RX100 IV, RX100 III,
RX100 II, HX50V, HX90V, HX400V, HX400, and HX300