buy pro audio in india

Lightweight at Only 1.2 Ounces | Flexible Mounting Bracket | 1/8" TRRS Connector | 1/8" Headphone Jack on Rear | Includes Furry Windshield

Open Box | Compact Size and Lightweight | All-Metal Microphone Body | No Battery Required (Plug-In Power) | Cardioid Polar Pattern | Includes Rycote Lyre Shock-Mount | Furry Windshield | 1/8" Output Connector

Cardioid & Hypercardioid Polar Pattern | Pre-Polarized Design | Gold-Sputtered Capsule Housing | Switchable 10 dB Pad

Mobile Journalist, Vlogger, Run & Gun | For Cameras and Smartphones | Battery-Free Operation via Plug-In Power | Built-In Wind Protection and Shockmount | Locking 3.5mm TRS Output | 3.5mm TRS and TRRS Output Cables | Directional Sound Pickup | Ultracompact and Ultralightweight | Furry Windscreen for Outdoor Use | Mounts to Camera Cold Shoe | Sennheiser India 2 Year Warranty

Digital Vinyl System Interface | For Turntables & CD Players | Two Sets of RCA for Inputs & Outputs | Professional Quality: 24-Bit / 96 kHz

4 channel/8 source real-time matrix mixer | Smooth 100mm long Pitch Slider | Dual balanced mic inputs

High-Torque: 5 kgf/cm | Isolated Direct Drive Motor System | Built-In RGB Platter Light | Isolation Feet Eliminate Feedback

Four Phono/Line Inputs + Digital Inputs | Dual USB Audio Connections | BPM FX and Sweep FX | Expressive EQ Mode: Classic or Isolation

7" Motorized Vinyl & Aluminum Platter | Dual-Deck Playback Engine | Self-Contained Software Librarian | Three USB Inputs, One SD Card Reader

Engine Prime DJ System | No Computer Needed | 10" Multi-Gesture Touch Display | 6" Capacitive-Touch Jog Wheels

DJ Engine Stand-alone Technology | 2x USB Inputs for Playback & Stand-alone | Includes 4-Deck Serato DJ Software | 2 High-Definition Displays

Four-Channel Serato DJ Controller | Digital Mixer with Line and Phono Inputs | Dual USB Interfaces for Two Computers | 16 Velocity-Sensitive Performance Pads

Professional 2-Deck Controller | Touch-Sensitive Jog Wheels | 24-Bit / 44.1 kHz Audio Interface | Hot Cue and Sample Pads

Vlogger, Run & Gun, Voiceover, Podcaster | For Cameras, Mobile Devices & Computers | 30-Hour USB Rechargeable Battery | Variable Gain, Pad, Roll-Off & HF Boost

E Mount Lens/Full Frame Format | Aperture Range: f/1.4 to 22 | One Hybrid and One Aspherical Element | Ultra Multi-Coating Lens Coat | Manual Focus & Aperture Lens | Bright Distance & Depth of Field Scales

Sony E Mount/APS-C Format | 12mm (35mm Equivalent) | Aperture Range: f/2.8 to f/22 | Fisheye Design, 180° Angle of View | Three ED and Two Aspherical Elements | UMC Coating

Portable Microphone/Guitar Interface | 2 Simultaneous Input Channels | XLR, 1/4", and 3.5mm Connection Points | Smartphone & DSLR Connectivity | Toggle Between Mono and Stereo Operation | 48V Phantom Power for Condenser Mics | 2 Gain-Control Thumbwheels

Plugs Directly into iOS Devices | Lightning Connect & 3.5mm | eadphone Out | Cardioid Polar Pattern | 20 Hz to 20 kHz Frequency Response | 115 dB SPL | Includes Mic Clip

Includes SC6-L Mobile Interface | 2 x 3.5mm TRRS Inputs for Microphones | 1 x 3.5mm Headphone Out for Monitoring | Lightning Connector for iOS Devices | 24-Bit / 48 kHz Recording | Includes 2 smartLav+ Microphones

Rode Genuine Accessories | Condenser Microphone | Ultra-low noise | Wide dynamic range

Heavy-Duty Metal Body | Internal Capsule Shockmount | On-Mic Selectable High-Pass Filter | Heat-Treated High-Strength Mesh Head | 9V Battery, 24V or 48V Phantom Power | Battery Status Indicator

For Camcorders and Video DSLRs | Highly Directive | Compact Size | Switchable Low-Cut Filter | Phantom or Battery Powered | Low Battery Indicator | Shockmount for Camera Shoe | Foam Windshield | All Metal Housing | Sennheiser India 2 Year Warranty

Mobile Journalist, Vlogger, Run & Gun | For Cameras and Smartphones | 100-Hour Run Time via AAA Batteries | Built-In Wind Protection and Shockmount

Pressure-Gradient Microphone | For Film, Radio, Television | Highly Immune to Humidity | High Consonant Articulation | High Feedback Rejection | Includes MZ415 Windscreen | Hypercardiod at Low and Mid Frequencies | Lobar Pattern Above 2 kHz | Sennheiser India 1 Year Warranty

Two Shotgun Elements | Super-Cardioid Pickup Pattern | Captures Sound within Camera Angle | Good Off-Axis Sound Rejection | Stereo 1/8" Connector | Frequency Response: 50 Hz to 20 kHz | Max SPL: 132 dB | Stainless Steel Micro-Mesh Cover | Internally Shock-Mounted | Runs on 2x AAA Batteries | Sennheiser India 2 Year Warranty

Closed, Around-Ear Design | Soft Ear Cushions & Ergonomic Design | 20 Hz to 20 kHz Frequency Response | 6.6' Single Sided Cable | Includes 1/4" Stereo Jack Adapter | Sennheiser India 1 Year Warranty

Fur Windshield for Rode Blimp | Minimizes Wind Noise | Acoustically Transparent

1 Year Warranty

See all Rode Mics

Furry High-Wind Microphone Cover | Minimizes Wind Noise | Remains Acoustically Transparent

1 Year Warranty

See all Rode Mics

Furry Wind Cover for the VideoMic GO | Minimizes Wind Noise

1 Year Warranty

See all Rode Mics

For VideoMic Pro with Lyre Shock-Mount | Minimizes Wind-Noise | Acoustically Transparent

1 Year Warranty

See all Rode Mics

For the Rode NTG1 and NTG2 | Zip on Wind Muff | Works with the Rode VideoMic

1 Year Warranty

See all Rode Mics

Extends Rode Blimp System | For Use with Rode NTG8 Shotgun Mic | Fits Shotgun Mic Barrels up to 23.6" | Includes DeadWombat Windshield

1 Year Warranty

See all Rode Mics

Protection from Wind Noise | Isolates From Shock and Vibration | Fits NTG1, NTG2, NTG3, NTG4 and NTG4+ | Fits Any Shotgun Mic up to 12.75"

For Concealing Lavalier Mics | Absorbs Noise & Vibration | 2 Mounting Points for Redundant Miking | Made of Skin-Safe Material | Includes Skin-Safe Adhesive

For Concealing Lavalier Mics | Absorbs Noise & Vibration | 2 Mounting Points for Redundant Miking | Made of Skin-Safe Material | Includes Skin-Safe Adhesive

1 Year Warranty

See all Rode Mics

For the VideoMicro Microphone | Modular with 3-Sections | Lightweight

Measures 33 to 81" to (83-205.74cm) | Compact and Lightweight

1 Year Warranty

See all Rode Mics

Suitable for Shotgun Microphones | Lightweight | Extends from 2'.8" to 10' | Five Sections | Intuitive Twist-Lock Mechanic

For Boompole or Handheld Applications | Dual Rycote Lyre Mounts | Reduces Handling Vibrations | Four Possible Cable Mounting Points | Lightweight Handle | Cushioned Grip | 3/8"-16 Thread at Base

The Rode PSM1 Shockmount is designed for the Rode Podcaster Microphone

32" (820mm) Horizontal Reach | 33" (840mm) Vertical Reach | Touch-Fastener Cable Wraps | Desk-Clamp Included | Desk-Insert Hardware

Rode WS8 Deluxe Windshield

Minimizes Wind Noise | For VideoMicro Microphone | For VideoMic Me/Me-C/Me-L Microphone | Synthetic Fur

Fits the Rode NTG3 Shotgun Microphone | Soft Wind-Muff Texture | Excellent Wind Noise Protection

Fits Rode NTG2, NTG1, NTG4 and NTG4+ | Soft Wind-muff Texture | Excellent Wind Noise Protection

High Off-Axis Attenuation | Includes Windscreen and Mount

Detail & Low Noise During Wide Shots | Supercardioid Polar Pattern | External RF Biased True Condenser | Withstands Humidity & Adverse Weather

Omnidirectional Pattern | Shock Mounted Capsule Reduces Noise | Internal Pop Screen Reduces Plosives | Frequency Response Optimized for Speech | Die-Cast Aluminum Body & Matte Finish