Edelkrone

For edelkrone Motion-Controlled Devices | Control Devices without an App | Remotely or Manually Set Poses | Record Poses with 3 Programmable Buttons

Motion Control Robot Camera Platform | For Flat Indoor Surfaces | Supports Most Tripods | Supports up to 30 Pounds

For Canon LP-E6-Type Batteries | Uses 2 x Batteries in Parallel | For Slide Module v2 | For HeadPLUS or HeadPLUS PRO

Coreless DC Motor |Silent Operation | Requires Head Module & Slide Module

Battery Power for the HeadPLUS | Single Gold Mount Battery Plate | Two D-Tap Ports to Power Accessories

Smooth Automatic Pan and Tilt Head | 10 lb Maximum Load | Use on Tripod or SliderPLUS | Manual or Smartphone App Control

Smooth Automatic Pan and Tilt Head | 20 lb Maximum Load | Use on Tripod or SliderPLUS PRO | Manual or Smartphone App Control

Motorized Jib Attachment | 1.6' Camera Travel, 360° Pan | Variable Travel 1.6' in 8 to 140 Seconds | Control with iOS or Android App

Supports Monitors up to 9" | Constant Friction System | Mounts on Either Side of Camera | Mounts to Standard Hot Shoe

Supports Monitors up to 9" | Constant Friction System | Mounts on Either Side of Camera | Mounts to Standard Hot Shoe

Motorized Add-On for SliderPLUS Models | SliderPLUS + HeadPLUS/HeadONE Multi-Sync | Quieter Operation than Previous Versions | New OLED Screen & Physical Power Button

Quiet, Portable Motorized Slider | 11.3" Length, 7.9" Travel Distance | Supports up to 30 lb Horizontally | Supports up to 10 lb Vertically

Dual-Length Slider with Movable Rails | 1.3' with 15 lb Payload Tripod Mounted | 0.7' with 50 lb Payload Surface Mounted | Supports Motion Control Slide Module v3

Dual-Length Slider with Movable Rails | 2.6' with 10 lb Payload Tripod Mounted | 1.3' with 40 lb Payload Surface Mounted | Supports Motion Control Slide Module v3

Dual-Length Slider with Movable Rails | 1.6' with 25 lb Payload Tripod Mounted | 0.8' with 50 lb Payload Surface Mounted | Supports Motion Control Slide Module v3

Dual-Length Slider with Movable Rails | 2.9' with 20 lb Payload Tripod Mounted | 1.4' with 40 lb Payload Surface Mounted | Supports Motion Control Slide Module v3

Compatible with HeadPLUS & HeadPLUS PRO | Uses Two L-Series Batteries in Parallel

Load Capacity: 15 lb | Leg Sections: 2 | Weight: 1 lb | 1/4"-20 Tripod Head Mount

Supports Heavy Camera Loads & Low Speeds | No Batteries or Chargers Required | Completely Mechanical Solution

Provides Stop-Motion Capability | Supports Shoot-Move-Shoot | Integrated Focus Adjustment Knob | Supports Dragonframe Software

Battery Power for the HeadPLUS | Single V-Mount Battery Plate | Two D-Tap Ports to Power Accessories

Ultra-Compact 360° Motorized Pan System | Remote Controllable via iOS/Android App | Desktop Mount or Attach to Other Gear | LP-E6 Battery Plate | Motion-Controlled Panning Shots | Time-Lapse Sequences, Stop-Motion Shots | Automated 360 Panorama Photo Mode | Ultra-Silent Step Motor Driver | 3/8"-16 on Top/Bottom (1/4"-20 Bushing) | Add-On Tilt and Turntable Kits Supported

Attaches Two HeadONE Units Together | Enables Both Pan and Tilt Motion | 7 lb Capacity |

Motion Control Robot Camera Platform | For Flat Indoor Surfaces | Supports Most Tripods | Supports up to 45 Pounds | Automatically Calibrates to Center | Controlled via Bluetooth | Programmable for Motion Timelapse | Works w/ Gold Mount or V-Mount

Quiet, Compact 360° Motorized Pan System | Remote Controllable via iOS/Android App | Motion-Controlled Single-Axis Panning | Supports Heavy Rigs up to 30 lb | LP-E6 Battery Plate | Time-Lapse Sequences, Stop-Motion Shots | 3/8"-16 Mounts on Top and Bottom | For JibONE, DollyONE/PLUS, SliderPLUS

For HeadONE, Pan PRO, or DollyONE | 360° Rotation for Product Videos | Works with Edelkrone iOS/Android App | 1 x Matte White & 1 x Glossy Black Plate | 1 x Shutter Release Extension Cable | Type-B North American 3-Prong Plug | Limited 1-Year Warranty

Portable, Folding, Manual Slider | 1.3' Travel Distance | Fluid-Dampened SteadyMOVE | 16 lb Payload | Travels up to 4x Its Length | 1/4"-20 Camera-Mounting Screw| 3/8"-16 Threaded Tripod Mount | Machined Aluminum Construction

Portable, Folding, Manual Slider| 1.3' Travel Distance | Fluid-Dampened SteadyMOVE | 48 lb Payload | Adjustable Tension | Travels up to 4x Its Length | 3/8"-16 Camera-Mounting Screw | 3/8"-16 Threaded Tripod Mount | Machined Aluminum Construction

Flexible, Dual-Jointed Pan & Tilt Device | Supports up to 5.5 lb Camera Rig | Knob-Free Constant Friction Design | Use with Tripod or on Flat Surface | Smooth Panning with 340° Range | Quick Height Adjustments | Can Extend Camera Horizontally | Use to Increase Travel Range on Slider | Panning & Lens-Center Shifting Marks | Aluminum Build with Bubble Level

Single 15mm Rod-Mounted Follow Focus | Adjustable Handwheel Position | Works with Almost Any Diameter Lens | Focus Marks Visible to Camera Operator | 0.8 Pitch Drive Gear | Anti-Backlash Gearbox | Whip/Crank Socket

Improved Grip, Locks Down Quickly | 1/4"-20 Mounting Thread & Screw | Dual Lever Release, Toolless Operation | 6.6 lb Load Capacity | Lightweight at 3.5 oz | Aluminum & Stainless Steel Construction | Limited 1-Year Warranty

Economical 3D-Printable Design | Tripod-Mount Pan/Tilt Head, 5 lb Payload | includes Screws & Other Small Components | Includes Printable File of Other Parts

Economical 3D-Printable Design | Adjustable into Various Camera Supports | Includes Screws & Other Small Components | Includes Printable File of Other Parts | Limited 1-Year Warranty on Shipped Components (Extendable to Limited Lifetime Warranty with Product Registration)

Print Components from 3D Printer | Edelkrone Supplies CNC-Machined Parts | Assemble the Parts Yourself | PLA Filament-Preferred Printing Material | ABS and PETG are Acceptable Materials | Limited 1-Year Warranty on Supplied Parts, Extendable to Lifetime with Registration