Tripods & Supports

Load Capacity: 4 kg | Max Height: 63", Folded Length: 16.1" | Leg Sections: 4, Weight: 4 kg | Ball Head with Pan and Friction Knobs

Load Capacity: 15 kg | Maximum Height: 78.7" | Minimum Height: 18.9" | Folded Length: 19.6"

3-Axis Motion Control System | Genie II Motorized Pan/Tilt Head | Genie II Linear Drive Unit | 39" Magic Carpet Slider System

Rolling Case for Light Stands | Crush-Resistant, 52"-Long Interior | Holds 4 Turtle-Base C-Stands | Internal Tie-Down Straps

Replacement Part | Load Capacity: 9Kg | Aluminum Alloy Construction | Fits Carbon and Aluminum Travel Tripods

Load Capacity: 8 kg | Max Height: 61.6" | Min Height: 15.4" | Folded Length: 15.4"

Load Capacity: 4 kg | Max Height: 51.2" | Min Height: 17.3" | Folded Length: 12.6"

Load Capacity: 8 kg | Max Height: 68.1" | Min Height: 12" | Folded Length: 12.2"

Load Capacity: 12 kg | Max Height: 64.2" | Min Height: 16.1" | Folded Length: 16.1"

Compact Dovetail Plate | Fits Manfrotto 501PL-Type Base | 1/4"-20 and 3/8"-16 Camera Screws | Nonslip, Anti-Scratch Rubber Padding

Load Capacity: 1.5 kg | Maximum Height: 22" (Selfie Stick Mode) | Minimum Height: 11.4" | Leg Sections: 1

Load Capacity: 1 kg | Maximum Height: 12" | Minimum Height / Folded Length: 5.5" | Leg Sections: 1

Load Capacity: 1.5 kg | Maximum Height: 7.6" | Leg Sections: 1 | Weight: 110 g

4 Section Support with Flip Lock | Carry case for Travel | Height Range:- 61.95cm - 168.45cm | Weight - 2.64 kg | Support 20 kg Weight

4 Section Support with Flip Lock | Carry case for Travel | Height Range:- 62cm - 168.5cm | Weight - 2.16 kg | Support 20 kg Weight

3 Section Support | Carry Case For Travel | Weight :- 2.85 kg | Support 6 Kg Weight | Height Range :- 60cm - 180cm

Material：Aluminum | Length：103mm | Width：50mm | Weight：139g

360° Panning Base | 1/4" Mounting Screw | Max Load 11 Pounds | Ball Diameter 0.7"

Accessory Bracket for Zhiyun CRANE 2S | Manfrotto 501-Type Quick Release Design | 2 x 1/4"-20 Threads, 1 x Shoe Mount | Mounts on CRANE 2S Horizontal Baseplate

Plate Helps Balance Camera on Gimbal | 1/4"-20 Camera Mounting Screw | Mounts onto L-Bracket with 1/4"-20 Screw | M3 Threads for Original Lens Support

For DJI Ronin-S or Ronin-SC Gimbal | 1/4"-20 and 3/8"-16 Mounting Screws | Protects Gimbal's Heli-Coil Insert | ARRI-Style 3/8"-16 Accessory Thread

Shoe Mount for Accessories | Designed for DJI Ronin-S and Ronin-SC | Mounts with Two Captive M4 Screws | Safety Locking Design to Prevent Slips

Compatible with DJI Ronin-S and Ronin-SC | Set of Two Accessory Mounting Plates | Multiple 1/4"-20 Threads, 3/8"-16 Thread | Integrated NATO Rail, Rubber Pads

Lightweight Aluminum Baseplate | 15mm LWS Rod Support | Multiple Mounting Threads on Base | 1/4"-20 & 3/8"-16 Camera Mounting Screws

Support Large Camera on DJI RS 2/Ronin-S | 1.6" Longer than Original Plate | 3/8"-16 & 1/4"-20 Camera Screws | 1/4"-20 Counterweight Thread on Rear

Add Accessories to Your DJI Ronin-SC | Multiple 1/4"-20 and 3/8"-16 Threads | 3/8"-16 Anti-Twist Accessory Threads | Rubber Padding Protects Gimbal

Clamping range: 22mm | Height: 138mm | Max load: 5kg | weight: 635g

Height: 128mm | Weight : 224g | Max. load: 12kg | Base diameter: 46mm

Base diameter: 58mm | Weight: 1kg | Max. load: 8kg

Load Capacity: 15kg | Maximum Height: 65" | Leg Section: 5 | Folded Length: 18.6"

Includes M1 and M4 Modules | Arca-Compatible | Versatile Flash Bracket

Max. height: 1640mm | Min.Height: 100mm | Folded length: 570mm | Leg Section : 4 | Max load: 30kg | Weight:2.1kg

Arca-Swiss B1, Z1 | Gitzo 1780, 2780, 3780 | Cullmann 40200, 40170, 40180, 40190 | Linhof Profi II, Profi III

Replaces the Lens's Original Foot | Arca-Type Compatible Double Dovetail | Low Profile and Better Balance | 1/4"-20 and 3/8"-16 Mounting Sockets

Max. height: 1490mm | Min.Height: 200mm | Folded length: 595mm | Leg Section : 4 | Max load: 15kg | Weight: 2kg

Replaces the Lens's Original Foot | Arca-Type Compatible Double Dovetail | Low Profile and Better Balance | Lightweight and Durable Foot

Arca-Type-Compatible Replacement Foot | Anodized 6061 Aluminum | `Double Dovetail Design | Provides Rigidness and Stability

Max. height: 1390mm | Min.Height: 200mm | Folded length: 360mm | Leg Section : 5 | Max load: 8kg | Weight: 1.33kg

Arca-Type-Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Arca-Type Compatible Replacement Foot | Anodized 6061 Aluminum | Provides Rigidness and Stability | Reduces Flex and Vibration

Replaces the Len's Original Foot | Arca-Type Compatible Double Dovetail | Low-Profile and Low Center of Gravity | 1/4"-20 and 3/8"-16 Mounting Sockets

For 400f/2.8 IS (Ver. I, II,) 600f/4 IS (Ver.I,II) and 800 f/5.6 IS

Arca-Type Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Load Capacity: 6 kg | Maximum Height: 55.5" | Minimum Height: 4.9" | Folded Length: 19"

Reinforced Dual Leg 253C Tripod | BV-15 Video Fluid Head, 70mm Flat Base | Mid-Level Spreader, 22 lb Maximum Load | Arca-Type Quick Release Plate

Arca-Type-Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Compatible with 400mm f/2.8E FL VR | Compatible with 600mm f/4E FL ED VR | Compatible with 800mm f/5.6E FL ED VR | Replaces Stock Foot on Rotation Collar

Replaces Stock Foot on Rotation Collar | Lower-Profile, Lower Center of Gravity | Better Balance for Gimbal Head Use | Shaped for Use as Lens Handle