buy rigs & cages at lowest prices in india

Formfitting Camera Cage, Styled Design | Top Handle, HDMI/USB-C Cable Clamp | Detachable Shoe Mount, Strap Slots | Arca-Type Base, NATO Rail, QD Mount | 1/4"-20 & 3/8"-16 Accessory Threads Maintains Access to Camera Controls

2 x Screen Protectors for RED KOMODO 6K | Tempered Glass Film, 2.5D Rounded Edges | Wear-, Water-, Oil-, and Scratch-Proof | IK03 Shockproof, Anti-Fingerprint

For Side of Tilta Full or Half Cage | Single 15mm Rod Holder | Tightening Thumbscrew | Aluminum and Steel Construction

Battery-Free Audio Capture | Omnidirectional Polar Pattern | USB Type-A Adapter Included | For Devices with USB Type-C Port

Aluminum Side Handle for Camera Cage | For Right- or Left-Hand Use | NATO Clamp Mount | 3 x 1/4"-20 Accessory Threads

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on Each End | Removable Shoe Adapter on One End | Measures 7" Long, Large Locking Lever

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on Each End | Removable Shoe Adapter on One End | Measures 11" Long, Large Locking Lever

2-Pack of Universal Magic Arms | Mount a Light, Monitor, Microphone | Two Rotating Ball Heads | Two 1/4"-20 Mounting Screws at Each End

Supports monitors or other accessories | Adjusted in 360 degrees | Maximum payload of 1.5Kg

For 5 or 7" Onboard Monitor | 2.6 lb Maximum Payload | Swivels 360° / Tilts 150° | Protective Rubber Padding on Top

Shoe Mount for Accessories | Mounts onto Rigs, Brackets, and Cages | Safety Catch Prevents Accessory Removal | Safety Release Button, 1/4"-20 Screw

For 5 or 7" Onboard Monitor | Mounts with 2 x 1/4"-20 Screws | 3.3 lb Maximum Payload | Swivels 360° / Tilts 170°

Swivels 360° / Tilts 180° | Adjust Tightness on Each Axis | For 5 or 7" On-Camera Monitors | Lockable in Any Position

For 5 or 7" Onboard Monitor | NATO Clamp Mount | 3.3 lb Maximum Payload | Swivels 360° / Tilts 170°

Mount a 5 or 7" On-Camera Monitor | NATO Clamp Mount, 3.3 lb Maximum Load | Tilts 180°, Lockable in Any Position | Protective Rubber Padding on Top

With a Red Locking Lever | Allows Mounting a Cold Shoe | 1/4''-20 Mounting Points on the Top | Attaches to any NATO Rail Accessories

3.3 lb Weight Capacity | 0.6 to 1.57" Clamping Range

Full Metal Construction | A Sturdy Clamp-on Other End | Equipped with 1/4’’ Screws on One End | Useful in Clamp Mounting 1/4" Compatible Accessories

Can Be Attached to Gimbal Crossbars/Rods | 1/4"-20 Support for Monitors/Accessories | 15 to 40mm Jaw Clamp Opening | 3.3 lb Load Capacity

Mounts on Surface up to 2" Wide | 3.5" Adjustable Magic Arm | 180° Mini Ball Head on Both Ends | 1/4"-20 Mounting Studs

Use to Mount Gear with 1/4" Socket | Bottom Accessory Hot/Cold Shoe Foot

Sturdy Mini Ball Head | Universal Compatibility | Aluminum Alloy Construction | Cold Shoe Base with 1/4" Hold

Ballhead with Arri Locating Pins | Two Ballheads on the Ends | Universal Compatibility | Rugged Construction

Adjustable Ball Heads on Both Ends | 1/4"-20 Mounting Screw at Each End | 5.5" Long | Load Capacity: 3.3 lb

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on One End | NATO Clamp on Other End | 5.5" Long, Load Capacity: 3.3 lb

Lightweight Magnesium Alloy Baseplate | Dual 15mm LWS Rod Support | Quick Release Manfrotto-Style Plate | ARRI-Standard Dovetail Mount on Base

For Mirrorless & DSLR Cameras | 15mm LWS Rod Support | 0.94" of Vertical Adjustment | Arca-Style Quick Release Plate

For Mirrorless and Small Cine Cameras | 15mm LWS Rod Support | Arca-Swiss Style Quick Release Plate | 2.3" of Vertical Adjustment

15mm LWS Rod Support | 1/4"-20 and 3/8"-16 Accessory Mounts | Non-Slip Top Surface | Thumb-Lever Lock

Lightweight Aluminum Baseplate | 15mm LWS Rod Support | 1/4"-20 & 3/8"-16 Camera Mounting Screws | 1/4"-20 & 3/8"-16 Base Mounting Threads

2 x 15mm LWS Rod Clamps | 2 x Tripod Mounting Plates | Helps Balance Front-Heavy Camera Rigs | 1.6" Front-to-Back Adjustment

Dual 15mm LWS Rod Clamps | Use Rod Clamps Separately or Together | 1/4"-20 and 3/8"-16 Mounting Threads | Nonslip Top Surface

Arca-Type Base and Plate Set | 1/4"-20 and 3/8"-16 Mounting Threads | Compatible with Most Arca-Type Plates | Mount on Tripod, Jib, Shoulder Mount

Compact Arca-Type Plate | 1/4"-20 and 3/8"-16 Camera Screws | Nonslip, Anti-Twist Rubber Pads | Durable Aluminum Construction

Two Counterbore Holes | 1/4"-20 Thread | Aluminum Alloy Construction

8" Long Sliding Bridge Plate Support | Safety Catches Add Security at Ends | 3/8"-16 & 1/4"-20 Mounting Threads | Multiple Through-Slots

Maintains Access to Camera's Hot Shoe | 1/4"-20 & 3/8"-16 Accessory Threads | Built-In Shoe Mount & NATO Rail | Integrated Arca-Type Base

Full Camera Cage for a7 IV & a7S III | Top Handle, HDMI Cable Clamp | 1/4"-20 & 3/8"-16 Threads | NATO Rail, Shoe Mount

Lightweight & Low Profile | Aluminum Alloy Construction | 15mm Rod Holes Spaced 60mm Apart | Equipped with 1/4''-20 and 3/8"-16 Threaded Holes

Lightweight & Low Profile | Aluminum Alloy Construction | Equipped with 1/4''-20 and 3/8"-16 Threaded Holes | Can be Mounted on SmallRig Railblocks, Dovetails, and Short Rods

Top Plate for Accessories | 1/4"-20 and 3/8"-16 Threads | ARRI Accessory Mounts

Lightweight, Black Aluminum Alloy | Extendable via Integrated 12mm Threads | For Camera Accessory Mounting

Pair of 15mm Rods | Lightweight Carbon Fiber Construction

Pair of 15mm Rods | Lightweight Carbon Fiber Construction

Pair of 15mm Rods | Lightweight Carbon Fiber Construction

Lightweight, Black Aluminum Alloy | Extendable via Integrated 12mm Threads | For Camera Accessory Mounting

Lightweight, Black Aluminum Alloy | Extendable via Integrated 12mm Threads | For Camera Accessory Mounting | Includes End Caps

Pair of 15mm Rods | Stainless Steel Construction | Lightweight Design | Corrosion Resistant