Accessories

Shoulder Pad with 15mm LWS Rod Support | For Mirrorless/DSLR/Small Cine Cameras | Rod Clamp Mounts to Front or Rear of Rig | Lightweight, Flexible Design

Wood Handle for Camera Cage | Start/Stop Trigger Button | Use on Right or Left Side | 1/4"-20, 3/8"-16 & Cold Shoe Mounts

Compact Side Handle for Camera Cage | Dual 1/4"-20 Thumbscrew Mount | For Right-/Left-Hand Use | 3 x 1/4"-20 Mounting Threads, Strap Slot

Wood Side Handle for Camera Cage | Can Be Configured for Right or Left Hand | Adjusts Up & Down with Sliding Connector | 1/4"-20 Thumbscrew Mounts, 0.7" Apart

Wood Side Handle for Camera Cage | Can Be Configured for Right or Left Hand | Adjusts up & down with Sliding Connector | NATO Clamp Mount

For Right Side of Camera Rig | ARRI-Standard Rosette with M6 Screw | Adjustable Height Range, 360° Rotation | Rosewood and Aluminum Construction

Wooden Handgrip for Left Side of Rig | Natural Rosewood Construction | Up/Down & Angle Adjusting via 2 Screws | Mounts via ARRI-Standard Rosette

Aluminum Side Handle for Camera Cage | For Right- or Left-Hand Use | Mounts via 2 x 1/4"-20 Screws | Adjusts 1.7" Vertically

Cheese Plate-Style Top Handle | Balances Side to Side on NATO Rail | 15mm Rod Clamp, 3 x Shoe Mounts | 1/4"-20 & 3/8"-16 Accessory Threads

Mounts using 1/4"-20 Mounting Screws | Front ARRI-Style Accessory Mount | 1 x Shoe Mount | Compact, Contoured Aluminum Design

Mounts on Cage using Two 1/4"-20 Screws | Low Center of Gravity for Balance | 1/4"-20 & 3/8"-16 ARRI Accessory Threads | 2 x Shoe Adapters, 360° Rotation

Mounts with Shoe Adapter & Thumbscrew | 2 x Shoe Mounts, 1 x Locking Shoe Mount | Multiple ARRI-Style Anti-Twist Mounts | 1/4"-20 & 3/8"-16 Accessory Threads

Mounts to Standard NATO Rail | Balances Front-to-Back & Left-to-Right | 2 x Anti-Twist ARRI Accessory Mounts | 2 x Cold Shoe Adapters

Mounts via ARRI-Style Anti-Twist Screw | 3 x Shoe Mounts, 1 x 15mm Rod Clamp | 1/4"-20 & 3/8"-16 Accessory Threads | Aluminum & Stainless Steel Construction

Mounts to NATO Rail | Rotates 360° | Use as Top or Side Handle | Ergonomic Wooden Grip on Bottom

Fits Any 10-55mm Rod | 5.5 lb Load Capacity | Multiple 1/4"-20 Threads | 1 x ARRI-Style Accessory Thread

Fits Any 15-44mm Rod | T-Shaped Locking Lever | Anti-Slip Rubber Pads Inside Jaw | 1/4"-20 and 3/8"-16 Threaded Holes

Rotating Mini Ball Heads on Both Ends | 5.3 lb Maximum Load, 4.4" Total Length | 1 x Thumbwheel 1/4"-20 for Easy Mounting | 1 x 1/4"-20 Mounting Stud

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on Each End | Rubber Padding on Thumbscrew Mounts | Measures 9.8" Long, Large Locking Lever

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on Each End | Measures 5.5" Long, Large Locking Lever | 3.3 lb Maximum Load

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on Each End | Removable Shoe Adapter on One End | Measures 7" Long, Large Locking Lever

Adjustable Ball Heads on Both Ends | 1/4"-20 Screw on Each End | Removable Shoe Adapter on One End | Measures 11" Long, Large Locking Lever

2-Pack of Universal Magic Arms | Mount a Light, Monitor, Microphone | Two Rotating Ball Heads | Two 1/4"-20 Mounting Screws at Each End

Cell Technology: Li-ion | Capacity: 13 200 mAh 190 Wh

For 5 or 7" Onboard Monitor | 2.6 lb Maximum Payload | Swivels 360° / Tilts 150° | Protective Rubber Padding on Top

Shoe Mount for Accessories | Mounts onto Rigs, Brackets, and Cages | Safety Catch Prevents Accessory Removal | Safety Release Button, 1/4"-20 Screw

Swivels 360° / Tilts 180° | ARRI-Style Anti-Twist Mount | For 5 or 7" On-Camera Monitors | Lockable in Any Position

For 5 or 7" Onboard Monitor | Mounts with 2 x 1/4"-20 Screws | 3.3 lb Maximum Payload | Swivels 360° / Tilts 170°

Swivels 360° / Tilts 180° | Adjust Tightness on Each Axis | For 5 or 7" On-Camera Monitors | Lockable in Any Position

For 5 or 7" Onboard Monitor | NATO Clamp Mount | 3.3 lb Maximum Payload | Swivels 360° / Tilts 170°

Mount a 5 or 7" On-Camera Monitor | NATO Clamp Mount, 3.3 lb Maximum Load | Tilts 180°, Lockable in Any Position | Protective Rubber Padding on Top

Helps to Eliminate Reflections and Glare | Reduces Haze and Blue Cast in Landscapes | Greater Color and Tonal Saturation | T* Anti-Reflective Coating

Helps to Eliminate Reflections and Glare | Reduces Haze and Blue Cast in Landscapes | Greater Color and Tonal Saturation | T* Anti-Reflective Coating

Helps to Eliminate Reflections and Glare | Reduces Haze and Blue Cast in Landscapes | Greater Color and Tonal Saturation | T* Anti-Reflective Coating

Helps to Eliminate Reflections and Glare | Reduces Haze and Blue Cast in Landscapes | Greater Color and Tonal Saturation | T* Anti-Reflective Coating

Absorbs Ultraviolet Light | Reduces Bluish Cast of Daylight | General Protective Filter | T* Anti-Reflective Coating

Absorbs Ultraviolet Light | Reduces Bluish Cast of Daylight | General Protective Filter | T* Anti-Reflective Coating

3.6V 2600mAh Lithium-Ion Batteries | Pack of 3 Batteries | For CRANE 3S/SE, CRANE 3 LAB | For WEEBILL-S, WEEBILL LAB

3.3 lb Weight Capacity | 0.6 to 1.57" Clamping Range

Full Metal Construction | A Sturdy Clamp-on Other End | Equipped with 1/4’’ Screws on One End | Useful in Clamp Mounting 1/4" Compatible Accessories

Can Be Attached to Gimbal Crossbars/Rods | 1/4"-20 Support for Monitors/Accessories | 15 to 40mm Jaw Clamp Opening | 3.3 lb Load Capacity

180° Mini Ball Heads on Both Ends | 1/4"-20 Mounting Stud | Cold Shoe Adapter | 3.3 lb Load Capacity

Mounts on Surface up to 2" Wide | 3.5" Adjustable Magic Arm | 180° Mini Ball Head on Both Ends | 1/4"-20 Mounting Studs

2 1/4"-20 Shoe Mounts with Extra Screws | 360° Ball Head Rotation | Aluminum Alloy Construction

Use to Mount Gear with 1/4" Socket | Bottom Accessory Hot/Cold Shoe Foot

Adjustable Ball Heads on Both Ends | 1/4"-20 Mounting Screw at Each End | 5.5" Long | Load Capacity: 3.3 lb

For Mirrorless & DSLR Cameras | 15mm LWS Rod Support | 0.94" of Vertical Adjustment | Arca-Style Quick Release Plate

For Mirrorless and Small Cine Cameras | 15mm LWS Rod Support | Arca-Swiss Style Quick Release Plate | 2.3" of Vertical Adjustment