camera cage from smallrig

12mm Thread Rod Cap | Durable Aluminum Construction | The Rod Cap is Screwed into your Rods | It Prevents Your Equipment From Sliding Off From Your Rods

Adapts 12mm to 15mm Standard Rod Clamp | Works with DJI Ronin 12mm Rod Clamp | M12 Threads on Ends for Extension | Measures 4.7" in Length

Extend SmallRig 15mm Rods | M12 Threaded Studs

Low-Profile Aluminum Build | Sprin Loaded Locking Thumbscrew | Fits 19 to 25mm Diameter Microphones | Silicone Pads to Secure and Absorb Bumps

Dual Mic Bracket for Two-Person Vlogging | Mount and Connect Two Mic Systems | Output Separately Editable Files | 2 x 3.5mm Audio Inputs, 1 x 3.5mm Output

M5 Thread | Ratchet Wingnut | 18mm Screw Depth | Compatible with Railblock of 1266 and 1406

Cold Shoe Foot | 1/4" Top Thread, 3/8" Bottom Thread | Aluminum Alloy

20mm Profile | Two-Piece Bundle | Stainless Steel Construction | Comes with Standard 1/4"-20 Thread on Both Ends

Two-Piece Bundle | Stainless Steel Construction | Comes with a Standard 1/4"-20 Thread | Foldable Quick Release Handle on Each Screw

With female 1/4" thread to male 3/8" thread | 5 packs thread adapters with 1/4" to 3/8" adapter | Made of Stainless steel | Turn 1/4" screws into 3/8" screws

Cold Shoe Mount for Accessories | Mounts to Rigs, Brackets, and Cages | Bending Bevels Prevent Accessory Removal | Arrows for Accessory Directional Mount

Rectangular Folding Multi-Tool, 7 Tools | Screw Storage Threads, Torx T25 Driver | Phillips & Flat Head Screwdrivers | 3/16" + 2.5, 3 & 4mm Allen Wrenches

Built-in Flat Screwdriver | Form Fitting and Lightweight L-Bracket | Arca Compatible Base Plate and Side Plate | 1/4"-20 Accessory Threads for Added Mounting Flexibility

Anti-Twist Design | Adjustable Side Plate | Integrated Arca-Type Mount | For Sony a1 / a7S III / a7R IV / a9 II

For Select Sony Cameras | Includes 2 Screen Protectors | Tempered Glass Film with Rounded Corners | Wear-Resistant, Scratch-Proof Protection

Four-Point Suspension System | Fits Mics Measuring 0.6-1.6" in Diameter | Locking Tilt Knob | Includes Shoe Mount

Compatible with Arca-Type Plate | Mount on Jibs, Tripods, and Cages | 1/4"-20 and 3/8"-16 Mounting Threads | Secure Locking Lever

46mm Standard Quick Release Safety Rail | Compatible with NATO Accessories | Spring-Loaded Pin at Both Ends | Durable Aluminum Alloy

Compatible with NATO Accessories | Spring-Loaded Pin at Both Ends | 2.75" Long | Secures to Cage with 2 x 1/4"-20 Screws

Protect DJI Action 2 from Scratches | Attaches to Camera using Magnets | Protects Camera from Drops & Slipping | 2-Piece Design for Easy Installation

Adjusts 3" to Balance Camera Rig | 2 x Cold Shoe Adapters | 1/4"-20 & 3/8"-16 Accessory Threads | 2 x Anti-Twist ARRI Accessory Mounts

Aluminum Top Handle | Cold Shoe Mount | 1/4"-20 and 3/8"-16 Mounting Threads | Mounts on Cage with Two Included Screws

Two Cold Shoe Mounts | 1/4"-20 and M2.5 Attachment | Compatible with Select Cages/Supports

Supports Most EVFs up to 3.3 lb | 360° Rotation on Both Ends | Double NATO Clamp with Safety Catch | 1/4"-20 Screw on EVF Mount

Dual-Handle Kit with ARRI-Style Rosettes | 15mm Dual-Rod Clamp | 360° Rosette Joint Rotation | Comfortable, No-Slip Rubber Handgrips

Two Rubber Handles for Left & Right | 15mm Rod Block | 11.8" Long Crossbar | Locking Thumbscrews

6.6 to 10.2" Adjustable Extension Arm | 2 x ARRI-Standard Rosettes | 2 x Male M6 Thumbscrews | Thumb-Lever Fastener

Holds Power Banks from 2.09 to 3.43" | Multiple 1/4"-20 Threaded Mounting Holes | Clamping Jaws are Lined with Rubber Pads | Weighs a Mere 3.7 Ounces

Supports Resolutions up to 4K UHD, 60 Hz | PVC Jacket | Ultra-Slim Design | Versatile Usage

Supports 4K UHD @ 60 Hz | PVC Jacket | Suitable for Use in Camera Rigs | Includes Cable Tie for Neat Installation

Supports 4K UHD @ 60 Hz | PVC Jacket | Suitable for Use in Camera Rigs | Includes Cable Tie for Neat Installation

Supports 4K UHD @ 60 Hz | PVC Jacket | Suitable for Use in Camera Rigs | Includes Cable Tie for Neat Installation

Female HDMI Type A on One End | Male Micro-HDMI Type D on Other End | 2 x 1/4"-20 Threads on Female End | Ultra-Slim Cable for up to 4K60 Video

Female HDMI Type A on One End | Male Mini-HDMI Type C on Other End | 2 x 1/4"-20 Threads on Female End | Ultra-Slim Cable for up to 4K60 Video

Female HDMI Type A on One End | Male HDMI Type A on Other End | 2 x 1/4"-20 Threads on Female End | Ultra-Slim Cable for up to 4K60 Video

Secures via 1/4"-20 Screw | Durable Aluminum Construction | HDMI Clamp Having Weights of 15g | Prevents Unintentional Disconnection

Formfitting Camera Cage | Integrated Shoe Mount, 1/4"-20 Screw | Multiple 1/4"-20 Accessory Threads | Maintains Access to Camera Controls | Rubber Padding to Protect Camera | Front Threads for Lens or Rod Support | Durable Aluminum Construction | Limited 1-Year Warranty

Formfitting Aluminum Camera Cage | Does Not Obstruct Access to Components | Removable Silicone Handgrip | Integrated Arca-Type Plate | 2 x Shoe Mounts, Rubber Padding on Base

Formfitting Aluminum Camera Cage | Maintains Access to Controls and Slots | Integrated Arca-Type Plate | 1/4"-20 and 3/8"-16 Accessory Threads | 3/8"-16 ARRI-Style Anti-Twist Mount

Two Cold Shoe Mounts | Formfitting Camera Cage | Single ARRI-Style Accessory Hole | 1/4"-20 and 3/8"-16 Accessory Threads

For SmallRig Sony a7S III Camera Cage | One Easy-Grasp Knurled 1/4"-20 Screw | Prevents HDMI Cable Pulls & Disconnects | 1/4"-20 Screw Mount with Anti-Twist Pins

Durable Aluminum Construction | Front Threads for Optional Lens Adapter | Formfitting Camera Cage for Sony a7S III | ARRI-Style Accessory Threads with NATO Rail

Formfitting Camera Cage for Sony a7C | Maintains Access to Camera's Hot Shoe | 1/4"-20 & 3/8"-16 Accessory Threads | Arca-Type Base, 1 x Shoe Mount | ARRI-Style Anti-Twist Accessory Mounts | Anti-Twist Side Lock

1/4"-20 Accessory Threads | Strap Slot with Rubber Padding | ARRI-Style Accessory Mount on Top | Formfitting Camera Cage for a7R IV/a9 II

Formfitting Camera Cage | Strap Slot with Rubber Padding | 1/4"-20 & M2.5 Anti-Twist Screws | Open Access to Controls with Slots & Ports

Adjustable Mini Ball Head | Supports 22 lb | 1/4"-20 Camera Screw | Solid and Secure Base

Works with 2.4 to 3.4" Wide Smartphones | Ideal for Filmmaking & Vlogging | 2 x Side Handles & 1 x Top Handle | 2 x Cold Shoes & Multiple 1/4" Mounts

Turn Wireless GO into Handheld Mic | 5.8 to 8.7" Telescoping Extension Design | Horizontal and Vertical Shoe Mounts | Anti-Slip Foam Grip, Aluminum Structure | 1/4"-20 Mounting Threads on Bottom