camera rig accessory

Formfitting Full Camera Cage | 1/4"-20 & 3/8"-16 Accessory Threads | Anti-Twist Three-Point Locking Design | Top & Side Hawklock NATO Rails | Integrated Arca-Type Quick Release Plate

Compact Side Handle for Camera Cage | Dual 1/4"-20 Thumbscrew Mount | For Right-/Left-Hand Use | One 1/4"-20 Accessory Mounting Thread

Relieve Handheld Camera Wrist Strain | Mount on Cage via NATO Clamp | For Right-/Left-Hand Use | 3 x 1/4"-20 Threads, Shoe Mount | 13.2 lb Maximum Load

Relieve Handheld Camera Wrist Strain | Dual 1/4"-20 Thumbscrews 0.7" Apart | For Right-/Left-Hand Use | 3 x 1/4"-20 Mounting Threads, Shoe Mount | 13.2 lb Maximum Load

For SmallRig Matte Box | Enables Swing-Away Capability | Mounts onto 15mm LWS Rods | 1/4"-20 Mounting Screw | Horizontal & Vertical Height Adjustment

4 Clamps, Each with 1/4"-20 Screw | Secure and Neaten Camera Cables | Fits 0.08 to 0.3" Diameter Cables | Soft Silicone Center

Large Thumb-Lever Fastener | Load Capacity: 3.5Kg, Rubber Padding | Clamp Mounts on Surface 0.5 to 2.6" Wide | Dual Ball Head Magic Arm & 1/4"-20 Screw

Add Accessories to Rig or Cage | Single 15mm Rod Clamp with Locking Lever | 1 x 1/4"-20 Mounting Thumbscrew | 1 x 1/4"-20 Accessory Thread | Durable Aluminum Construction

Extends Sony XLR-H1 Top Handle Unit | Attaches via Four Built-In Screws | Multiple 1/4"-20 and 3/8"-16 Threads | Two Cold Shoe Mounts, NATO Rail

Wireless Follow Focus, Iris, Zoom, VND | 2.4 GHz Wi-Fi and Bluetooth Connectivity | Nano II Wireless Handwheel Controller | Nano II Wireless Control Handle | 2 x Nano II Lens Control Motor Kits | L-Series Battery Plate

For Select SmallRig Black Mamba Cages | Prevents Accidental Cable Disconnects | 2 x Easy-to-Grasp Knurled M4 Screws | Secures Both HDMI & USB-C Cables | Mounts onto Cage with 2 x M4 Screws

Compatible with Select Tiltaing Cages | 1/4"-20 & 3/8"-16 Accessory Threads | 1 x Shoe Mount, NATO Clamp Mount | Compact Design for Small Cameras | Aluminum & Stainless Steel Construction

Fits Power Banks 2.3 to 3.7" Wide | Cold Shoe & 1/4"-20 Accessory Mounts | Mounts via Integrated 1/4"-20 Screws | Aluminum Alloy Construction

0.8 MOD Gear for Cine Follow Focuses | 66 to 68mm Diameter for Focus/Zoom | Fully Closed and Requires No Screws | Even Pressure, No Drifting, Accurate

Single 7.87"-Long 15mm Rod | Chamfered

For Tiltaing Sigma fp Full Cage | For Tiltaing Sony a7S III Half Cage | 1/4"-20 & Anti-Twist 3/8"-16 Threads | 1 x Shoe Mount, 1 x 15mm Rod Support | Spring-Loaded, Locking Thumbscrew | Aluminum Construction

Fits Tripod Support Arm with 1/4" Thread | Mounts Camera with Suitable Cold Shoe | Attach Three Accessories | Expands up to 3.5" Wide | ±90° Adjustable Angle | Compatible with VEO CSM or CSM DLX

Manfrotto-Type Bottom Plate | Arca-Swiss Top Plate | 1/4"-20 Mounting Screws | 1/4"-20 and 3/8"-16 Threads | Two-Stage Locking Lever | Compatible with DJI RS Gimbals

Follow Focus for DSLR/Mirrorless Lenses | Non-Damping, Forward/Reverse Switch | 2-Step A/B Stops or 360° Rotation | Works with Optional Standard Whip/Crank | Composite, Aluminum & Wood Grain Design

Mounts AirTag on Camera Rig | Dual 1/4"-20 Screw Mounting | 0.4 to 0.7" 1/4"-20 Screw Spacing | Side Holes Maintain Tracking Ability | M2.5 Screw Cover Mount | EVA Rubber Pad Dampens Noise

V-Mount Battery Plate | 15mm Rod Clamp | 14.8V D-Tap Output, DC Barrel Output | Aluminum & Stainless Steel Construction

L-Series Battery Plate | 2.1mm DC to NP-FZ100 Dummy Battery Cable | 12 and 7.4 VDC Barrel Outputs | 36W USB-C Input/Output Port | Built-In Circuit Protection | LED Status Indicators

Attach 37mm Lenses to M-Mount Backplates | For the iPhone 12 to 15 Series Cage | For the iPhone 11 M-Series Lens Cage | Aluminum Alloy Construction

For Nikon Z-Series | For Arca-Type & RC2 Tripod Heads | Full Access to Buttons & Ports | Provides Multiple Mounting Points

90&Deg; Horizontal to Vertical Rotation | Built-In Arca-Type / Manfrotto RC2 Plate | Full Access to Ports and LCD Screen | 1/4"-20 & 3/8"-16 Bottom Threads

Support Right Wrist When Holding Gimbal | Silicone Pad Attaches to Handle Base | 1/4"-20 & 3/8"-16 Accessory Threads | Tilts to Proper Height, QD Strap Holes | Mounts Using 1/4"-20 Screw | Aluminum & Stainless Steel Construction

Combines with Gimbal's Mini Tripod | Rear Grip Support for Low-Angle Shots | Additional Support for All Modes | Attaches Directly to Gimbal's NATO Mount

Battery Plate Adapter | Mounts onto 15mm LWS Rods | 1/4"-20 and M3 Mounting Threads | Lightweight, Durable Aluminum Design