Photography

Load Capacity: 11.0 lb, Leg Sections: 3 | Tiltable & Rotatable Rapid Center Column | Swivel 360°, Tilt 90° Up or Down

Load Capacity: 15.4 lb, Leg Sections: 3 | Tiltable & Rotatable Rapid Center Column | Swivel 360°, Tilt 90° Up or Down | Aluminum Alloy Legs, Twist Locks | Maximum Height: 68.2" | Minimum Height: 9.0" | Folded Length: 29.0", Weight: 5.0 lb

Load Capacity: 15.4 lb | Tiltable & Rotatable Rapid Center Column | Swivel 360°, Tilt 90° Up or Down | Carbon-Fiber Legs, Leg Sections: 3 | Maximum Height: 63.8" | Minimum Height: 7.3" | Folded Length: 24.6"

Load Capacity: 39.7 lb | Max Height: 70.9" | Min Height: 7.5" | Folded Length: 28" | Leg Sections: 3 | Weight: 8.4 lb | Innovative Locking Camera Screw Wheel

Lightweight Carbon Fiber | Innovative Locking Camera Screw Wheel | Anti-Sand, Anti-Dust Leg Locks | Legs Adjust to 3 Angles | All-Terrain Spiked/Rubber Feet

Lightweight Carbon Fiber | Innovative Locking Camera Screw Wheel | Anti-Sand, Anti-Dust Leg Locks | Legs Adjust to 3 Angles | All-Terrain Spiked/Rubber Feet

Load Capacity: 30.9 lb | Max Height: 66.9" | Folded Length: 26.75" | Leg Sections: 3 | Weight: 7.3 lb

Load Capacity: 39.7 lb | Max Height: 70.9" | Folded Length: 28" | Leg Sections: 3 | Weight: 8.6 lb

Load Capacity: 39.7 lb | Maximum Height of 70.9" | Folded Length: 28" | Leg Sections: 3 | Weight: 7.8 lb

Aluminum Alloy Construction | Load Capacity of 8.8 lb | Maximum Height of 61.75" | Weighs 4.51 lb | Folded Height of 26.65" | Leg Angles of 25, 50, and 80 Degrees

Magnesium Die-Cast Construction | Load Capacity of 17.63 lb | Maximum Height of 6.3' | Weighs Just 6.61 lb | Leg Angles of 25, 50, and 80 Degrees | Rubber Feet For Stability | All-Weather Large Foam Grips

Load Capacity: 17.6 lb | Max Height: 63" | Folded Length: 26" | Leg Sections: 3 | Weight: 4.9 lb

Load Capacity: 17.6 lb | Max Height: 63" | Folded Height: 24.4" | Leg Sections: 4 | Weight: 5.1 lb | Flip Locks

Heavy-Duty Aluminum Alloy Construction | Load Capacity of 26.4 lb | Maximum Height of 70.86" | Weighs 6.17 lb | Leg Angles of 25, 50, and 80 Degrees | Angled Rubber Feet With Sand/Snow Shoes

Load Capacity: 26.5 lb | Maximum Height: 67" | Min Height: 7.5" | Folded Length: 24.8" | Leg Sections: 4 | Weight: 6.4 lb

Aluminum-Alloy Construction | Load Capacity of 35.3 lb | Maximum Height of 74.8" | Weighs Just 7.32 lb | Leg Angles of 25, 50, and 80 Degrees

Load Capacity: 35.3 lb | Maximum Height: 70.7" | Min Height: 8.1" | Folded Length: 26" | Leg Sections: 4 | Weight: 7.6 lb

Aluminum Alloy Construction | Load Capacity of 13.2 lb | Maximum Height of 75.0" | Weighs 8.0 lb | Folded Height of 30.5" | Leg Angles of 25, 50, and 80 Degrees

Aluminum Alloy Construction | Load Capacity of 26.4 lb | Maximum Height of 75.19" | Weighs 7.93 lb | Leg Angles of 25, 50, and 80 Degrees

Diamond-Woven Carbon Fiber Construction | Load Capacity of 26.4 lb | Maximum Height of 70.86" | Weighs 5.4 lb | Leg Angles of 25, 50, and 80 Degrees

Diamond-Woven Carbon Fiber Construction | Load Capacity of 26.4 lb | Maximum Height of 75.19" | Weighs 7.27 lb | Leg Angles of 25, 50, and 80 Degrees | SBH-200 Ballhead Included

For B2 and B1 Off-Camera Flash Heads | Speed Ring and Softbox Rotate 360° | Patent-Pending Easy Snap-In Design | Color Coded Holes for Softbox Rods | Silicone Rubber Collar | Reduced Weight

Genuine Profoto Accessories

Genuine Profoto Accessories

2 x 1000Ws Monolights | 0.03-1.2 Sec Recycling | Built-In AirTTL Radio Receiver | Quick Burst: Up to 20 Frames per Second | 300W Modeling Lamp | 100-240 VAC

2 x 500Ws Monolights | 0.03-0.6 Sec Recycling | Built-In AirTTL Radio Receiver | Quick Burst: Up to 20 Frames per Second | 300W Modeling Lamp

1000Ws Monolight, 300W Modeling Lamp | Built-In AirTTL Radio Receiver | 0.03-1.2 Sec Recycling | Quick Burst: Up to 20 Frames per Second | Compatible with 120+ Light Shaping Tools

500Ws Monolight, 300W Modeling Lamp | Built-In AirTTL Radio Receiver | 0.03-0.6 Sec Recycling | Quick Burst: Up to 20 Frames per Second | High Speed Sync to 1/8000 Sec

Aperture Range: f/1.4 to f/22 | Compatible with Full Frame and APS-C | 127.5mm (35mm Equivalent on APS-C Sensor) | One Aspherical Element | UMC Multi-Coating

Canon EF-M Mount/APS-C Format | 25.6mm (35mm Equivalent) | Aperture Range: f/2.0-22 | Two Aspherical Lens Elements

E-Mount Lens/Full-Frame Format | Aperture Range: f/1.4 to f/16 | Two Aspherical Elements, Two HR Elements | Ultra Multi-Coating | Internal Focusing Design

E-Mount Lens/Full-Frame Format | Aperture Range: f/2.8 to f/22 | Two HR and Three Aspherical Elements | Ultra Multi-Coating | Autofocus with Manual Focus Override

EF-Mount Lens/Full-Frame Format | Aperture Range: f/2.8 to f/22 | One Extra-Low Dispersion Element | Ultra Multi-Coating | Autofocus, AF/MF Switch | Weather-Sealed Construction

F-Mount Lens/FX Format | Aperture Range: f/2.8 to f/22 | One Extra-Low Dispersion Element | Ultra Multi-Coating | Autofocus, AF/MF Switch | Weather-Sealed Construction

Holds DSLR, 70-200mm, 3-4 Lenses, Flash | Compartment for Laptop Up to 13" | Rear Expansion Pocket | Exterior and Interior Pockets | Rain Protector

Fits Select Video and Cinema Cameras | Water-Repellant Ripstop Nylon Material | Dual-Zippered Closure | Top and Side Handles | Lens Pillow

Fits Select Video and Cinema Cameras | Water-Repellant Ripstop Nylon Material | Dual-Zippered Closure | Lens Pillow | Includes Shoulder Strap

The ideal DJI Mavic Pro camera messenger bag | Padded pocket for your tablet for extra security | Clever, removable dividers to organise your kit | Zippered and unzippered external zip pockets for personal items | Large, easy-to-access top opening for camera

Holds DSLR 24-70, 70-200/2.8, Extra Lens | Padded 13" Laptop/Tablet Compartment | Zippered Closure | Use for Cameras or as an Everyday Bag | Water-Repellent, Nylon Construction

Holds Mirrorless, 70-200/4, & 2-3 Lenses | Padded iPad Compartment Zippered, Top Access to Gear | Trolley, Carry & Tripod Straps | Tartan Fabric Lining & Leather Accents | Water-Repellent, Nylon Construction

Holds DSLR, 70-200/2.8, 2 Extra Lenses | Padded 15" Laptop Compartment | Interior and Exterior Pockets | Use for Cameras or as an Everyday Pack | Water-Repellent, Nylon Construction

Holds DSLR, 3 Lenses, Flash | Accommodates 15" Laptop | Removable Camera Insert | Water-Repellent Materials | Rear Trolley Strap Removable Rain Cover

Holds DSLR/Mirrorless and 3 Lenses | Accommodates 70-200mm f/4 Lens | Holds 14" Laptop and 9.7" Tablet | Weather-Resistant Exterior, Rain Cover

Holds DSLR/Mirrorless and 3 to 4 Lenses | Accommodates 70-200mm f/4 and Drone Kit | Holds 14" Laptop and 9.7" Tablet | Flexible, Versatile Interior Divider | Weather-Resistant Exterior, Rain Cover

Holds Mirrorless Camera or Drone Kit | Removable, Stand-Alone Equipment Pouch | Detachable Laptop and Tablet Sleeve | Pass-Through for Luggage Trolley Handle | Weather-Resistant Exterior, Rain Cover

Multi-Configuration Multimedia Backpack | Spacious Main Compartment | Removable, Stand-Alone Equipment Pouch | Detachable Laptop and Tablet Sleeve | Holds 15" Laptop and 9.7" Tablet | Weather-Resistant Exterior, Rain Cover

Universal Smartphone Clamp | Double 1/4'' female thread located at the base and on the back | Silicone rubber pads for a secure grip | Self-standing bracket on its back | Compatible with any smartphone up to 8,4 cm (3.2'') wide

Mini tripod for CSCs and smartphones | Smartphone clamp with 1/4 thread attachment included | Comfortable handgrip to capture great videos | Push button locking mechanism for easy set-up | Lightweight, intuitive to use and easy to carry