Photography

Leg Sections: 4 | 9-Layer Carbon Fiber Legs | Spiked and Rubber Feet | Short Center Column, Carry Case Included

Leg Sections: 4 | One Leg Converts to Monopod | 9-Layer Carbon Fiber Legs | Spiked and Rubber Feet

Short Center Column for 0 Series Tripods | Carbon Fiber Construction | Allows Low Angle Shooting | 3/8"-16 Mounting Thread

For RF 24-105mm f/2.8 L IS USM Z Lens | Controller Operation via 20-Pin port | Enables Rapid & Low-Speed Zooming | Easily Attaches/Detaches

Reversible 1/4"-20 and 3/8"-16 Mount | Closed-Foam Grip | Dust Resistant Twist Locks | Rubber Foot Avoids Fatigue & Slippage

For FUJIFILM GFX System | For Arca-Type & RC2 Tripod Heads | Full Access to Buttons & Ports | Provides Multiple Mounting Points

Maximum Height: 60.8" | Closed Length: 21.1" | Sections: 4 | Reversible 1/4"-20 and 3/8"-16 Mount

For Canon R-Series | For Arca-Type & RC2 Tripod Heads | Full Access to Buttons & Ports | Provides Multiple Mounting Points

For Sony A-Series, FX3 & FX30 | For Arca-Type & RC2 Tripod Heads | Full Access to Buttons & Ports | Provides Multiple Mounting Points

Compact, Lightweight, Quick to Set Up | Tripod, Video Head, and Soft Case | Adjustable Pan Bar | Quick Release Camera Plate

Dedicated Grip for FUJIFILM X-T5 | Arca-Type Dovetails | Three 1/4"-20 Sockets | Includes Red Shutter Button

Maximum Height: 73.4" | Closed Length: 26.4" | Sections: 4 | 3-Leg Base with Built-In Ball

Formfitting Cage with Textured Wood Grip | Arca-Type Base, Shoe Mount, QD Mount | 1/4"-20 & 3/8"-16 Accessory Threads | 1/4"-20 & M2.5 Anti-Twist Screw Mounts

Fits Select Sony Alpha Series Cameras | 1/4"-20 and M2.5 Camera Screws | Maintains Access to Ports and Controls | Multiple 1/4"-20 and 3/8"-16 Threads

Universal Dolly to Fit Most Tripods | 15 kg Load Capacity | Large 3" Wheels with Individual Brakes | Adjustable 12 to 17" Legs

Adjustable Ball Heads on Both Ends | 1/4"-20 Anti-Twist Screw on Each End | Measures 11" Long, Large Locking Lever | 3 kg Maximum Load

Works with vinyl, iron-on, paper, Smart Materials™ & more | Perfect companion for Cricut® cutting machines

3-in-1 tool for stunning foil effects on a variety of projects | For Cricut Maker® and Cricut Explore® machines

1 roll 30.5cm x 3.6m (12in x 12ft) | Easily transfer your vinyl designs to a variety of project surfaces

2 Deep-Point Replacement Blades | For Cricut Maker® and Cricut Explore® family machines

Now made with water-based paint and adhesive | Formulated for best possible adhesion and longest life

Supports up to 4K60 Resolution | Supports HDMI 2.0 | Ultra-Slim 0.1" Cable Diameter | Cable Tie Included

3.5 kg Payload Capacity | Anti-Slip Silicone Cushions | Clamps on 0.5 to 2.3" Rods | Aluminum & Steel Construction

Dedicated Grip for Nikon Zf | Increases Stability and Ergonomics | Provides Unobstructed Access to Ports | Features Arca-Type Compatible Dovetails

Cuts beautifully and weeds easily | Compatible with Cricut Explore Three and Cricut Maker Three | Works without a cutting mat – just load and go!| One roll of Cricut Smart Holographic Iron On in 0.9 m (3 ft)

1 Single scoring wheel replacement tip | Requires QuickSwap Housing | For Cricut Maker machines only | Creates extra-deep score lines for perfect folds and a flawless finish

Formulated for best possible adhesion and longest life | For Cricut Maker® and Cricut Explore® cutting machine

Made for tech fabrics like polyester and nylon | Easy to weed and apply; use your household iron or Cricut easy press

Cuts beautifully and weeds easily | Easily adheres to most materials to reveal a lustrous, multicolor finish

Cuts beautifully and weeds easily | Outlasts 50+ washes! | Works without a cutting mat – just load and go! | Compatible with Cricut Explore Three and Cricut Maker Three

Formfitting Aluminum Camera Cage | Open Access to Controls and Ports | Integrated Right-Side Grip, Shoe Mount | Integrated Arca-Swiss Base, NATO Rail

Mount Camera on Flat, Dry Surface | 1/4"-20 & 3/8"-16 Mounting Threads | 110 lb Maximum Horizontal Payload | Pump Button to Create Vacuum

1 roll 33cm x 3.6m (13in x 12ft) | Durable, yet removes without residue | Recommended for indoor use | For Cricut Explore 3 & Cricut Maker 3

Fashion a quick decal for your water bottle or decorate your mailbox | Personalize a little or a lot

For RF 24-105mm f/2.8 L IS USM Z Lens | Enables Rapid & Low-Speed Zooming | Easily Attaches/Detaches | Thumb Rest for Handheld Comfort

Full-Frame | f/6.3-9 to f/54 | Nano USM Motor | Focus/Control Ring & Two L-Fn Buttons | Optical Image Stabilizer

APS-C | f/4.5-6.3 to f/32 | 16-29mm (Full-Frame Equivalent) | STM Stepping AF Motor | 7-Blade Diaphragm

Full-Frame | f/2.8 to f/22 | Two Nano USM Motors | 11-Blade Diaphragm | Optical Image Stabilizer

Encode HDMI/SDI Video for 4K Streaming | Stream via 1 x 5G SIM, 5 x 4G SIM Slots | Wi-Fi/Ethernet Options, 4K/1080p Support | H.265/H.264 Streaming, 5" Touchscreen

UHD 4K30 Video Capture | Output via Micro-HDMI & USB-A | 1/2.8" CMOS Sensor, 1.98mm Focal Length | 4G LTE Bonding with 2 SIM Slots, Wi-Fi

Portable Wireless 4G Video Switcher | 7" Touchscreen | 2 x HDMI, 2 x SDI, and 4 x RTMP Inputs | H.264/H.265 Support up to 1080p60

Cellular Bonding Router | Aggregates 4 SIM Cards & 1 Ethernet | Wi-Fi Support | Built-In LCD Display

Encode HDMI/SDI Video for HD Streaming | HD Over Bonded Cellular Networks | Stream via 5G SIM/Wi-Fi/Ethernet/USB | H.265/H.264 Video Compression

Encode HDMI/SDI Video for HD Streaming | Stream via 3 x 4G SIM/Wi-Fi/Ethernet/USB | H.265/H.264 Streaming Support | Bond up to 6 x Network Links

1 roll 33cm x 3.6m (13in x 12ft) | Weather-resistant, ideal for outdoor projects | For Cricut Explore 3 & Cricut Maker 3

For Cricut Explore® 3 and Cricut Maker® 3 | Built-in trimmer ensures a straight edge every time

Perfect companion for all Cricut® cutting machines | Works with vinyl, iron-on, paper, Smart Materials™ & more

For Cricut Maker® only | 10X more pressure than the Scoring Stylus | Perfect, effortless folds