Photography

Optional Video Heads Available | Maximum Height: 62.4" | Minimum Height: 12.8 | Folds Down to 27.2"

Load Capacity up to 29 lb | 100mm Half Ball | 4-Step Counterbalance Mechanism | Ergonomic Adjustments

7.5 kg Load Capacity | Carbon Fiber Legs | 16 to 85" Range | 4-Step Counterbalance

For 501, 503 & NG Heads | RC5 Quick Release System

100mm Half Ball made in aluminum | universal 3/8 screw for head attachment | Long ergonomic locking handle

Load Capacity: 8.8 lb | Maximum Height: 77.56" | Minimum Height: 20.47" | Folded Length: 20.5", Five Sections

Length: 5.9" | Two 3/8" Studs | One 1/4"-20 Adapter | One 3/8"-16 Anti-Rotation Adapter

For 244 Mini and Micro Arms | Knurled Tightening Knob | Fast Attachment | Load Capacity: 6.6 lb

Compatible with 244Mini Friction Arm | 244 Micro Friction Arm | 244 Micro Friction Arm with Anti-rotation | 386B-1 Nano Clamp, and 055 and 190 Series Tripods.

Payload 1,5Kg (3,3 lb) at full extension | Very lightweight | Three sections articulated arm, max length 85cm (33,4in) | Sliding extension allow for flexible positioning.

Cold Shoe Mount, Center Ball Head | Rubber Grips Prevent Scratches, 5/8" Pin | Load Capacity: 4.4 lb, 5/8" Receiver | Ball Head Offers Precise Positioning

For Tripods with Spiked Feet

For Large Tripods with Round Feet | 132 lb Load Capacity | Cable Guards and Brakes | Folds for Transport

Three Sections | Pivot Clamp, Counterweight | Cable Clips

Holds DSLR, 3 Lenses, and Accessories | Accommodates 14" Laptop and 9.7" Tablet | Interior and Exterior Pockets | Padded Touch-Fastened Interior Dividers

Holds DSLR/Mirrorless and Attached Lens | Interior Memory Card Pockets | Exterior Zippered Side Pockets | Water-Repellent Nylon Construction

Holds CSC, up to 3 Lenses & Accessories | Interior and Exterior Pockets | Padded Touch-Fastening Interior Dividers | Exterior Bungee Straps for Small Tripod

Holds DSLR, up to 4 Lenses & Accessories | Accommodates 15" Laptop & 9.7" Tablet | Reconfigure Interior for Drone Storage | Fast Side Access to Gear Portion

Holds DSLR, 3 Lenses, and Accessories | Configure to Carry a Drone & Camera | Padded Sleeve for 14" Laptop/Tablet | Interior and Exterior Pockets

Holds DSLR with Grip, 4 Lenses, Flash | Padded Interior Dividers | Dual Exterior Side Zip Pockets | Front Interior Pocket

Holds 475B Tripod with 400 or 405 Head | Wider Top to Hold Larger Tripod Heads | Top Flap for Rapid Extraction | Asymmetrical Design / Ballistic Nylon

Holds Select 23" Tripods | Ballistic, Water-Repellent Nylon | Padded End Cap | Zipper Extends Entire Length

Holds Select 28" Tripods | Ballistic, Water-Repellent Nylon | Padded End Cap | Zipper Extends Entire Length

Adapts Light Blaster to Nikon Lenses | Full Aperture Control

Full-Frame | f/1.4 to f/16 | Designed for Astrophotography | HLA Autofocus Motor | TS-141 Tripod Socket

Set of 21 Blaster Transparencies | Creates Special Effects or Backdrops | Inserts Into Light Blaster | Easy to Operate

Metal Gobo Patterns

Set of 21 Blaster Transparencies | Creates Special Effects or Backdrops | Inserts Into Light Blaster | Easy to Operate

Allows Use of Studio Strobe | Holds Blaster & Lens in Front of Strobe | Bigger and Brighter Projections

Red, Green, Blue LEDs with 15 Sub-Colors | Micro-USB Charge Port | RGB Mode for Access to Myriad of Colors | 5 Effects Modes, Slap-On Magnetic Mount

Cold Shoe with 1/4"-20 Female Threads | Attached Adapter Holds 1 Bracelet

KYU-6 Bi-Color LED Light Wrap | KYU-6 RGB LED Light Wrap Bracelet | Compact and Wearable | 5 Brightness Levels, 10 Effects Modes

Charge and Power 3 KYU-6 LED Bracelets | USB Interface

Tunable Temperature between 2700-6500K | Micro-USB Charge Port, 8-Hour Runtime | 5 x FX Modes, Slap-On Magnetic Mount | Runtime: Min. Power: 8 Hrs. / Max: 1 Hr.

Fully Multicoated Lenses | Phase-Corrected BAK4 Roof Prisms | Durable Lightweight Composite Body | Large Slip-Resistant Center Focus Wheel

Fits Manfrotto 357 Rapid-Connect System | Secure Two-Point Mounting | Two Each 1/4"-20 & 3/8"-16 Screws | Plastic Anti-Twist Pin

For Select Monopods | Manfrotto FLUIDTECH Technology | Provides Full Fluid Movement | Vertical Lock for Level Panning

Flat Base Head; Half Ball Included | Nitrogen Piston Counterbalance Mechanism | 8.8 - 39.7 lb Continuous Counterbalance | Continuous Variable Pan and Tilt Drag

Load Capacity: 26.5 lb | Max Height: 64.6" | Folded Length: 16.9" | Leg Sections: 4

Load Capacity: 19.8 lb | Max Height: 59.1" | Minimum Height: 15.8" | Folded Length: 15.7"

RC4 Quick Release System

Attaches to Most Heads / Other Gear | Adds Quick Release Capability | 1/4"-20 & 3/8"-16 Threads on the Bottom | 357PLV Compatible with 357/516/526 Heads

Flexible clamp tripod with multiple attachment options | Securely clamps onto bars up to 40mm | 15.9mm stud with 6.35mm thread attachment

Fabric Type : Black Double | Light Reduction : 4 Stops

Bounce or Shoot Through | Increases Ambient Light | Ideal for Fill Light | 1-Stop Diffusion

For Speedlights and Strobes | 13 Inserts for Different Brands | Removable Front Diffuser | Durable Metal Framework

For Speedlights and Strobes | 13 Inserts for Different Brands | Removable Inner Baffle & Front Diffuser | Durable Metal Framework