Tripods & Supports

4 Section Support with Flip Lock | Carry case for Travel | Height Range:- 61.95cm - 168.45cm | Weight - 2.64 kg | Support 20 kg Weight

4 Section Support with Flip Lock | Carry case for Travel | Height Range:- 62cm - 168.5cm | Weight - 2.16 kg | Support 20 kg Weight

Material：Aluminum | Length：103mm | Width：50mm | Weight：139g

360° Panning Base | 1/4" Mounting Screw | Max Load 11 Pounds | Ball Diameter 0.7"

Universal Lightweight Fluid Head | Drop-In Quick Release Design | 360° Panning, +90/-75° Tilting | Bubble Level, Manfrotto QR Plate

Accessory Bracket for Zhiyun CRANE 2S | Manfrotto 501-Type Quick Release Design | 2 x 1/4"-20 Threads, 1 x Shoe Mount | Mounts on CRANE 2S Horizontal Baseplate

Plate Helps Balance Camera on Gimbal | 1/4"-20 Camera Mounting Screw | Mounts onto L-Bracket with 1/4"-20 Screw | M3 Threads for Original Lens Support

For DJI Ronin-S or Ronin-SC Gimbal | 1/4"-20 and 3/8"-16 Mounting Screws | Protects Gimbal's Heli-Coil Insert | ARRI-Style 3/8"-16 Accessory Thread

Compatible with DJI Ronin-S and Ronin-SC | Set of Two Accessory Mounting Plates | Multiple 1/4"-20 Threads, 3/8"-16 Thread | Integrated NATO Rail, Rubber Pads

Lightweight Aluminum Baseplate | 15mm LWS Rod Support | Multiple Mounting Threads on Base | 1/4"-20 & 3/8"-16 Camera Mounting Screws

Support Large Camera on DJI RS 2/Ronin-S | 1.6" Longer than Original Plate | 3/8"-16 & 1/4"-20 Camera Screws | 1/4"-20 Counterweight Thread on Rear

Add Accessories to Your DJI Ronin-SC | Multiple 1/4"-20 and 3/8"-16 Threads | 3/8"-16 Anti-Twist Accessory Threads | Rubber Padding Protects Gimbal

Clamping range: 22mm | Height: 138mm | Max load: 5kg | weight: 635g

Height: 128mm | Weight : 224g | Max. load: 12kg | Base diameter: 46mm

Base diameter: 58mm | Weight: 1kg | Max. load: 8kg

Load Capacity: 15kg | Maximum Height: 65" | Leg Section: 5 | Folded Length: 18.6"

Includes M1 and M4 Modules | Arca-Compatible | Versatile Flash Bracket

Max. height: 1640mm | Min.Height: 100mm | Folded length: 570mm | Leg Section : 4 | Max load: 30kg | Weight:2.1kg

Arca-Swiss B1, Z1 | Gitzo 1780, 2780, 3780 | Cullmann 40200, 40170, 40180, 40190 | Linhof Profi II, Profi III

Replaces the Lens's Original Foot | Arca-Type Compatible Double Dovetail | Low Profile and Better Balance | 1/4"-20 and 3/8"-16 Mounting Sockets

Max. height: 1490mm | Min.Height: 200mm | Folded length: 595mm | Leg Section : 4 | Max load: 15kg | Weight: 2kg

Replaces the Lens's Original Foot | Arca-Type Compatible Double Dovetail | Low Profile and Better Balance | Lightweight and Durable Foot

Arca-Type-Compatible Replacement Foot | Anodized 6061 Aluminum | `Double Dovetail Design | Provides Rigidness and Stability

Max. height: 1390mm | Min.Height: 200mm | Folded length: 360mm | Leg Section : 5 | Max load: 8kg | Weight: 1.33kg

Arca-Type-Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Arca-Type Compatible Replacement Foot | Anodized 6061 Aluminum | Provides Rigidness and Stability | Reduces Flex and Vibration

Replaces the Len's Original Foot | Arca-Type Compatible Double Dovetail | Low-Profile and Low Center of Gravity | 1/4"-20 and 3/8"-16 Mounting Sockets

For 400f/2.8 IS (Ver. I, II,) 600f/4 IS (Ver.I,II) and 800 f/5.6 IS

Arca-Type Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Load Capacity: 6 kg | Maximum Height: 55.5" | Minimum Height: 4.9" | Folded Length: 19"

Reinforced Dual Leg 253C Tripod | BV-15 Video Fluid Head, 70mm Flat Base | Mid-Level Spreader, 22 lb Maximum Load | Arca-Type Quick Release Plate

Arca-Type-Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Compatible with 400mm f/2.8E FL VR | Compatible with 600mm f/4E FL ED VR | Compatible with 800mm f/5.6E FL ED VR | Replaces Stock Foot on Rotation Collar

Replaces Stock Foot on Rotation Collar | Lower-Profile, Lower Center of Gravity | Better Balance for Gimbal Head Use | Shaped for Use as Lens Handle

Replaces Original Lens Foot | Arca-Type Compatible Double Dovetail | Low-Profile and Low Center of Gravity | Mounting Sockets and Dual Safety Stops

Dual Safety Stops | Designed for the Nikon 400/800 VR Lens | Flash Bracket Compatibility | Features1/4" and 3/8" Tapped Holes

For Select Nikon Lenses | Precision Machined | Provides 1/4" & 3/8" Holes for Mounting | Features Dual Safety Stops

Arca-Type Compatible Replacement Foot | Anodized 6061 Aluminum | Double Dovetail Design | Provides Rigidness and Stability

Load Capacity: 8 kg | Maximum Height: 61.8" | Minimum Height: 15.6" | Max Height without Center Column: 45.47"

Made of carbon fiber | High load capacity of 32kg | Suitable for heavy combinations | Five sections with twist lock | Legs to fix at three angles

Load Capacity: 17 kg | Maximum Height: 60" | Max Height without Center Column: 50" | Minimum Height: 13.2"

2.5 kg Capacity Flat Base Tripod Head | Carbon Fiber 4-Section Tripod Legs | Fully Convertible to a Monopod | 21.3 to 66.5" Height Range

Load Capacity: 20 kg | Maximum Height: 68.75" | Minimum Height: 19.3" | Folded Length: 19.45"

Load Capacity: 8.8 lb | Leveling Range: +/- 15° | Height: 10" | Weight: 0.4 lb

Compatible with 3016, 3018, 3249, 679, 680 & 681 Monopods

A high quality clamp tripod with a rapid-locking jaw | Compatible with Super Clamp pins, hooks and studs | Clamps on bars and plates from 13-55mm

60mm Half Ball Mount with Locking Handle | For Tripods with 60mm Bowl | Flat Head Mount with 3/8"-16 Screw | Measures 6.3" in Length

Optional Video Heads Available | Maximum Height: 62.4" | Minimum Height: 12.8 | Folds Down to 27.2"