Mount your monitor to any standard Baby Pin with the Rock Solid VESA Studio Monitor Mount from Tether Tools. Using a VESA compliant mount, the Vu-2 will accept monitors weighing up to 85 pounds and enable them to be conveniently mounted to a C-stand or other stand that has a 5/8" pin. Once secured, the joint can be loosened to tilt the monitor up to ±90°. Additional 5/8" accessory receptors are available for compatible arms, mounts and accessories to the top of the Vu-2.

This is the Rock Solid Master Articulating Arm from Tether Tools. It is a fully adjustable arm designed for positioning a tablet, small monitors, camera, light, flash, and many other accessories in the optimal position.

The dual 5/8" studs integrate with numerous standard photo and film clamps, platforms, and tools used to mount equipment, including Tether Table Aero, Connect iPad Bracket, Rock Solid Camera Platform, and Local Vu Monitor Mounts. The Rock Solid Arm is compact in design, simple to maneuver and features 21" of  full extension. It features three articulating joints and can easily mount compatible accessories to any desired location and angle. When the center knob is loosened, all three articulation points loosen for easy maneuverability. When the perfect position is achieved, simply tighten the knob and everything locks securely.

The two 5/8" Baby locking hex stud ball joints rotate 360 degrees, plus a cut-out in each sleeve surrounding the ball allows the stud to be bent 90 degrees. One stud accepts a 3/8"-16 thread, while the other accepts a 1/4"-20 thread for added versatility. Each stud has six milled flat surfaces, so whatever is mounted on the Master Arm, it will not rotate once secured. The central elbow rotates 360 degrees for infinite adjustability.

The Arm's center lock is metal construction with locking teeth. Many arms rely on friction and over-tightening of the knob to hold equipment in place, which may cause sagging or small movements over time. Unlike traditional designs, this arm's all metal construction utilizes a locking system which, once set, prevents any movement or sagging, thus achieving precise results and peace of mind when mounting equipment. Additionally, no replacement friction discs or pads are needed.

A versatile mount affording you flexible positioning of a speedlight or other shoe-mounted accessory, the RapidMount Cold Shoe Elbow from Tether Tools allows you to attach a flash or accessory to a light stand, arm, grip, or other support featuring a baby stud mount, or a 1/4"-20 or 3/8" mount via the included adapter. The adjustable head design allows you to swivel a full 360° or tilt 180°, with both controls featuring TruVu locking technology for securely fixing in place. The cold shoe mount also incorporates its own tightening screw and the mount also features an umbrella mounting hole for simple lighting setups. It is constructed from durable, lightweight aluminum alloy and finished with a flat black finish to reduce reflections.

The Rock Solid Camera Platform from Tether Tools allows you to safely mount a camera to light stands or accessories such as articulating arms with standard 5/8" studs. The platform has a 1/4"-20 threaded camera stud, two 5/8" receivers for the accessory of your choice as well as an umbrella receptacle.

The Rock Solid 22" Telescoping Arm from Tether Tools is an ideal utility accessory that can be used for everything from overhead lighting to stand extension. The aluminum arm telescopes from a closed length of 13-5/8" to 22" with a simple twist of its knob. Each end has a 5/8" stud topped with 3/8" threads for receiver or screw-in mounting options.