Record improved audio with your compatible camera, USB-C mobile device, or Lightning mobile device using the BOYAMIC 2-Person Wireless Microphone System from BOYA. The system includes two clip-on transmitters with omnidirectional microphones, two lavalier microphones, and a dual-channel receiver with interchangeable USB-C and Lightning adapters. Record in mono, stereo, or safety track modes and use noise cancellation technology to customize your audio experience and mitigate negative effects from sudden outdoor noises. The system also includes a 3.5mm TRS audio cable, a USB-A to USB-C cable, mounting magnets, furry windscreens, foam windscreens, and a charging case.
The receiver features interchangeable adapters that allow you to plug it directly into your USB-C or Lightning mobile device. A 3.5mm TRS output can also connect to a compatible camera for simultaneous recording to two devices. Output audio in mono, stereo, or safety track modes depending on the needs of your production. All of your system settings can be controlled using the onboard buttons and OLED screen. The integrated clip doubles as a mount by sliding into your camera's cold shoe slot. Monitor your audio signal using the headphone port.
Integrated omnidirectional microphones on the transmitters capture crisp audio in your next 2-person vlog or livestream. The transmitters can capture audio with a 48 kHz/24-bit sampling rate and a maximum 120 dB SPL. You can record audio directly to each transmitter thanks to their 8GB internal memory for up to 15 hours of backup recording. A 3.5mm TRS input accommodates a lavalier microphone for low-profile recording. Integrated back clips attach to your talent's lapel, belt, or even hat brim. For trickier fabrics use the included magnets.
All the components of the BOYAMIC system can communicate to one another from up to 984.3' away via line-of-sight 2.4 GHz technology. This means the BOYAMIC thrives in long-distance recording environments.
The transmitter units feature built-in 220mAh batteries that can function for 10 hours when not recording internally and 6 hours when internal recording is engaged. The receiver features a 300mAh battery with an 11-hour runtime. Use the USB-C ports on the devices to recharge in 1.5 hours. Alternatively, the included recording case can store and charge all of the components with its 1800mAh battery.
