The black Full Camera Cage for Blackmagic Design Cinema Camera 6K from Tilta is a modular, formfitting cage that both protects and adds accessory mounts to your camera. It features a flexible design and a bracket that accommodates an original battery grip in a half-cage form. Accessory mounts include a NATO rail, a rosette, two cold shoe mounts, and multiple anti-twist 1/4"-20 and 3/8"-16 threaded holes for accessories. The bottom of the cage incorporates an Arca-type plate and a magnetic screwdriver multi-tool.

Integrate this black Tilta Xeno Top Handle into your camera cage configuration for improved low-angle shooting. The top handle secures to your cage via a built-in 1/4"-20 screw with locating pins. Multiple 1/4"-20 and 3/8"-16 threads throughout the handle allow you to attach articulating arms, cable clamps, or other accessories. A single cold shoe slot accommodates a shotgun microphone or wireless transmitter. The handle's silicone grip makes for an ergonomic and anti-slip handgrip.

Add a solid-state drive to your Blackmagic Design Pocket Cine Camera 4K with this black Samsung T5 SSD Holder from Tilta. The aluminum and stainless steel holder is designed to snugly fit the Samsung T5 SSD, which is secured with a thumbscrew. The holder attaches to the cage with the included screws, and there are screws included to attach the separately available partial sun hood to protect your LCD monitor from sunlight and glare.

Add rods to your Blackmagic Pocket Cinema Camera 6K Pro and 6K G2 cameras when using the Tilta Half Cage with the extended bottom plate for the Blackmagic Design battery grip, with this black 15mm Rod Holder from Tilta. This rod holder enables you to use cinema-style accessories with your camera, battery grip, half cage setup (cage, extended bottom plate, and battery grip not included), which otherwise would not be possible, as the battery grip would raise the camera too far above the correct lens center-to-rod distance when using standard baseplate rod clamps.

This holder/clamp supports the 15mm LWS standard for rod supports, and it mounts on your cage via the extended bottom plate. The mounting screw attaches the rod holder to the cage, and the two locking pins on the holder interface with the divots on the cage to secure the holder to prevent shifting during use. The rod clamp locking lever is set underneath so that it's out of the way.

Make it easier to plug in your camera's HDMI cable when using Tilta's Blackmagic Design Pocket Cinema Camera 4K cage with this HDMI Right-Angle Adapter. The adapter is designed at a 90° angle and attaches to the corner of the cage with a thumbscrew. This puts the male HDMI type A connector in place to plug into your camera, and the female HDMI type A end remains unimpeded.